JOOAN Wireless/Wired NVR Surveillance System w/Remote Viewing



In this video I would like to show you a very nice, easy to use, plug and play 4 camera (indoor/outdoor) NVR surveillance system that was sent to me by the …

Comments

  1. Julio y Thalia Monserrate November 14, 2017 at 7:11 pm

    i have the same system and only one camera work the other 3 say no video source u knw wat i can do to fix my problem???

  2. Mohammad Majali November 14, 2017 at 7:11 pm

    Thank you sir

  3. Enigma light November 14, 2017 at 7:11 pm

    Also dont know how to get Audio on the NVR ALSO

  4. Enigma light November 14, 2017 at 7:11 pm

    Is there anybody on here who can Help Me'. I brought an online NVR Suppose to be Wi Fi … the cameras are very slow at picking up Motion… it picks up at least 5 seconds Later.

  5. Andrew November 14, 2017 at 7:11 pm

    So from my understanding the IP cameras will transfer the signal to DVR. and the DVR does not need to be connected to the router. and u can still Record

  6. Potato Salad November 14, 2017 at 7:11 pm

    dude your a life saver, just brought this, opened the box and was like errrrrrrrrrrrr no!… found your video and now its all up and running! thank you sir

  7. Tareq Abdulraheem November 14, 2017 at 7:11 pm

    hi
    thanks for video , I have the same set but forgot the user name and the password of the NVR can help me to reset them because I can not enter the menue

  8. James thompson sr November 14, 2017 at 7:11 pm

    how do you watch playback

  9. MISSDAYZEEDEE November 14, 2017 at 7:11 pm

    What an amazing review…i install mine tomorrow. Thank you so much for this well explained video.

  10. keflin ong November 14, 2017 at 7:11 pm

    thanks for the setup instructions but how do you setup the email functionality? thanks.

  11. Carlos Dasilva November 14, 2017 at 7:11 pm

    Do you know the temperature rating of the cameras? Thanks

  12. Osman Wan Halim November 14, 2017 at 7:11 pm

    how about the setting in NVR if I use power-line adapter instead of wireless?

  13. Nikky P November 14, 2017 at 7:11 pm

    Your instructions were super useful, thanks. However the issue we're having is related to the Network set up which you don't cover. We've got the recent instruction manual and are following all the steps but we keep getting a Failure to connect error related to the encryption type and I think this is preventing the email setup. Any useful tip would be appreciated. Thanks.

  14. Secured November 14, 2017 at 7:11 pm

    I think i found a flaw in your video. I found that setting the grid on video detection makes no difference to area for setting off the buzzer. I set mine for the driveway close to the house, and every time a car drives by out on the street, (out of grid area) it still sets off the buzzer. I contacted the company thinking this was an out of box failure, and they were kind enough to send me another nvr. it does the same thing. So basically editing an area with grid, unless im doing something wrong, does not work. On your video, you said everything out of grid area would not set the buzzer off. but it has on 2 of these nvr units.

  15. Charles V November 14, 2017 at 7:11 pm

    Can you adjust the motion sensitivity? With all of the night bugs do you get a lot of false alarms or emails? Does the sun or clouds set off the alarm?

  16. Nicole N. November 14, 2017 at 7:11 pm

    Thanks for the review.. is there a way to extend the power supply without using a power extension cord? So, can I purchased a longer power supply cord?

  17. huggi2 November 14, 2017 at 7:11 pm

    can you copy video to a network attached storage (Nas)

  18. Sam K November 14, 2017 at 7:11 pm

    Thanks for the prompt response – I noticed you have also responded to some other viewers – that's so nice of you. Many of the authors they just download the video and forget that. The DVR/NVR system got cheaper now so many people will get benefited and I am sure you will have many more views in future – you already have 3K plus in the last few months – I would say that's great. Little long but your video is simple to watch and well done. I would request that you please do part 2 for remote viewing setup. I could not find anywhere that describes step by step setup for remote viewing – short manual is not informative. I am still having problem to view remotely. It involves port forwarding, download some applications both on PC and Android/Iphone, Gateway/IP address setup etc to work efficiently. Should not take a long time for you to do this – perhaps just 10-15 minutes – very much look forward to seeing it. All the best for the good work you are doing for the community!!!!!

  19. Sam K November 14, 2017 at 7:11 pm

    Good video – I bought this unit and having tough time viewing remotely – this youtube video do not provide how to setup remote access – very bad – he can do one for remote access setup as Part2 – it's easy to say download Essenet app but there are so many into it to view remotely _ look forward to seeing part 2 soon.

  20. dick sdan November 14, 2017 at 7:11 pm

    it aimt wireless can cut power cable

Leave a Reply

Your email address will not be published.

Name *
Email *
Website